CR130 Compact High-Performance Fan Heater
The compact high-performance fan heater prevents the formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic housing provides double insulation and acts as protection against contact. The fan heater is available with an integrated thermostat or pre-set hygrostat for temperature or humidity control. The CR 130 was designed as a stationary unit for wall fixing.
For fixing on the bottom of the enclosure the fan heater CR 030 is recommended.
| Temperature safety cut-out | to protect against overheating in case of fan failure, |
|---|---|
| Axial fan, ball bearing | airflow see table |
| Heating element | PTC resistor, temperature limiting |
| Casing | plastic according to UL94 V-0, black |
| Connection | 2-pole clamp max. 2.5 mm 0.8Nm |
| Mounting | clip for 35 mm DIN rail, EN 60715 |
| Mounting position | vertical airflow (air outlet up, connection on bottom) |
| Operating / Storage temperature | -45°C to +70 °C |
| Operating / Storage humidity | max. 90 %RH (non-condensing) |
| Protection class / Protection type | IP20 |